Foundation Repair & Wall Support Systems
Stabl-Wall™ System
What Is a Stabl-Wall™ System?
Stabl-Wall™ does not stretch. Stabl-Wall™ is 10 times stronger than steel in tensile strength. Once applied to a wall, (perpendicular to a crack), the crack will not open wider because the carbon fibers will not stretch. Stabl-Wall™ is cheaper and less intrusive than wall anchors, but easier to install and stronger. Stabl-Wall™ is designed for cracks up to 2″ wide.
The Stabl-Wall™ System has a lifetime transferrable warranty on the wall to which it is applied and the only maintenance-free warranty.
Looks
- Virtually Invisible
- Paint Over It
- Panel It
- Dry-Wall Over It
- Non Corrosive
Size
- Thinnest Product on the Market
- Thin as a Dime
- 10X Stronger Than Steel
- 10 Times Tensile Strength of Steel
- Takes Up No Usable Space
Repair Value
- Weak Points Turn Strong
- Maintenance Free Repair
- No Mess to Install
- No Clean Up
- Repair Vs. Patch
- Increased Life
- Increased Durability
Additional Benefits
- Only Lifetime Warranty
- Only Maintenance Free Warranty
- Most Cost Effective Repair
- $100’s Compared to $1000’s
- Repair Options Vs. Replacement
- One Time Cost
- No Additional Cost
- Best Resale Value
- No Maintenance Cost
Specs
Foundation walls crack and bow due to stress created from pressure exerted from expansive soil or lateral earth movement. If not properly reinforced, foundation walls could eventually collapse.
Applied directly to foundation walls, the Stabl-Wall™ product counteracts the outside pressure by stabilizing the walls. It resists up to ten times normal pressure, making the walls stronger to eliminate shifting, expanding, cracking and bowing.
An engineers and surveyors report from Kenneth Jensen & Associates, Inc. on the feasibility of using carbonfiber polymer sheets on cracked residential foundation walls is available by request. This report was prepared specifically for the Stabl-Wall product.
| Parameter | Minimum Value | Governing Test Method |
|---|---|---|
| ParameterTensile Strength | Minimum Value500,000 psi | Governing Test MethodASTM D3039 |
| ParameterTensile Strain | Minimum Value1.5% | Governing Test MethodASTM D3039 |
| ParameterTensile Modulus | Minimum Value30,000,000 psi | Governing Test MethodASTM D3039 |
| ParameterColor | Minimum ValueBlack | Governing Test MethodNone |
| ParameterRoll Width | Minimum Value24 inches | Governing Test MethodNone |
| ParameterRoll Length | Minimum Value270 feet | Governing Test MethodNone |
Stabl-Wall Adhesives: Minimum Values
| Parameter | Stabl-Wall Primer | Stabl-Wall Paste Filler | Stabl-Wall Bonding Adhesive | Governing Test Method |
|---|---|---|---|---|
| ParameterColor Part A Part B Mixed | Stabl-Wall PrimerAmber Clear Amber | Stabl-Wall Paste FillerTan Charcoal Tan | Stabl-Wall Bonding AdhesiveAmber Clear Amber | Governing Test MethodNone None None |
| ParameterMix Ratio (Volume) Part A:Part B | Stabl-Wall Primer3:1 | Stabl-Wall Paste Filler3:1 | Stabl-Wall Bonding Adhesive3:1 | Governing Test MethodNone |
| ParameterWorking Time @ 70°F | Stabl-Wall Primer15 Minutes | Stabl-Wall Paste Filler30 Minutes | Stabl-Wall Bonding Adhesive35 Minutes | Governing Test Method1 Gallon Sample |
| ParameterShelf Life | Stabl-Wall Primer12 Months | Stabl-Wall Paste Filler12 Months | Stabl-Wall Bonding Adhesive12 Months | Governing Test MethodNone |
| ParameterTensile Strength | Stabl-Wall Primer2,000 psi | Stabl-Wall Paste Filler2,000 psi | Stabl-Wall Bonding Adhesive7,000 psi | Governing Test MethodASTM D638 |
| ParameterTensile Strain | Stabl-Wall Primer0.30 | Stabl-Wall Paste Filler0.05 | Stabl-Wall Bonding Adhesive0.03 | Governing Test MethodASTM D638 |
| ParameterTensile Modulus | Stabl-Wall Primer100,000 psi | Stabl-Wall Paste Filler230,000 psi | Stabl-Wall Bonding Adhesive400,000 psi | Governing Test MethodASTM D638 |
EverDry Waterproofing of Michiana Is Here for You!
Call us at 574-272-3788 or click here to request your free foundation inspection and estimate today!